Phase structure and crystallization behavior of polyethylene in its blends with cis-1,4-butadiene rubber

Phase structure and crystallization behavior of polyethylene(PE) in its blends with cis-1,4-butadiene rubber(BR) at different blend ratios and sample preparation conditions were studied. The PE is finely dispersed in the BR matrix. For samples hot pressed at 145 °C, circular PE microdomains with randomly oriented PE lamellar aggregates were produced. The domain size and number increase with increasing PE content. When the PE content is over 10 wt%, most of the PE domains impinged each other. The separated PE domains are connected by PE stripes with parallel arranged lamellar aggregates. For samples hot pressed at 140 °C, elongated PE microdomains with oriented PE lamellar aggregates were obtained due to the shear flow. The crystallization of PE in the blends depends on the phase structure. Confined crystallization of PE occurs in small microdomains at relatively low temperature. With the increase of domain size, the crystallization ability of PE increases while the confined crystallization decreases.     

阿维菌素纳米水分散体的制备、表征及稳定性

利用阿维菌素具有2个活性羟基的特性,设计合成了一种具有阿维菌素结构单元的阴离子型聚氨酯分散剂,采用核磁共振和红外光谱表征了其结构.利用分散剂与阿维菌素结构的相似性,将溶有阿维菌素的分散剂溶液加入水中,制备了阿维菌素的纳米水分散体.研究分散剂中羧基含量及其分子量对分散体粒径的影响,结果表明,随着羧基含量的增加,分散体粒径逐渐降低,适当控制分子量有助于改善分散剂的分散能力.透射电镜显示分散粒子具有近似球形的形貌,粒径在20~40 nm之间.纳米分散体具有较高的离心稳定性和稀释稳定性.     

微波消解-ICP-MS法测定药用明胶空心胶囊中微量重金属元素

采用微波消解技术,建立了一种电感耦合等离子体质谱法测定明胶空心胶囊中Cr,Co,Ni,Cu,Zn,As,Cd,Hg和Pb 9种微量重金属元素的方法。确定了微波消解仪和等离子体质谱仪的最佳操作参数,研究共存离子的干扰和消除方法,选择了各元素的测定同位素,以Ge,Rh和Tl为内标补偿基体效应,建立了样品测定方法。应用拟定的方法测定了不同生产厂家、不同批次的空心胶囊中微量重金属的含量。方法对试样中各元素测定的相对标准偏差为1.5%~14.1%,加标回收率在90.0%~102.0%。结果表明,方法简便、快速、灵敏,满足于空心胶囊中9种重金属元素的测定要求。     

问题引导法提高学生学习主动性的探索与实践*——以大学化学混合式教学为例

建设具有创新性、高阶性和挑战度的“金课”,是当代创新型人才培养的必然要求。大学化学是本校非化学类理工科专业基础课,相比于数学和物理,学生重视不足,导致教学效果不理想。为了解决这一问题,采取以学生为主的混合式教学模式,通过设置基础性、应用性及创新性问题,引导学生分层次解决,提高学生参与主动性。所设置的应用性问题包括科技前沿、专业相关、社会热点等,以增加内容的深度和广度,激发学生探索的兴趣。通过实验方案设计及实验检验培养学生的创新思维。采取累加式进行教学效果评价,实践表明该混合式教学模式能显著提高学生自主学习能力和兴趣,提高教学效果。     

高中化学“电负性”的项目式教学*——甲醛的危害与去除

电负性是高中化学选择性必修课程“物质结构与性质”模块的重要概念。本课例采用“项目式教学”的方式,在对“甲醛的危害与去除”的分析、讨论与实验过程中,加深对电负性概念的理解,同时尝试利用电负性分析与预测物质的化学性质,体会电负性概念的使用价值。     

基础化学教学中从化学视角解释医学知识*——以“龋齿的形成与防护”为例

为解决医学院学生难以运用化学知识联系解释医学内容的问题,以医学案例“龋齿的形成与防护”作为切入点,通过医学现象去揭示其中所蕴含的化学原理,探索将基础化学教学与医学内容相结合。采用化学与医学融合教学模式能够激发起学生学习化学的兴趣,培养学生思考分析解决问题的能力,为培养新时代复合型医学人才奠定基础。     

固相萃取/气相色谱-质谱法测定燃香烟气中9种大麻素类新精神活性物质

建立了同时测定燃香烟气中9种大麻素类新精神活性物质的气相色谱－质谱（GC－MS）分析方法。样品在燃香烟气收集装置中经溶剂提取,浓缩离心后,采用HLB固相萃取小柱净化,毛细管色谱柱Agilent HP－5MS毛细管柱（30 m × 0.25 mm × 0.25 μm）分离,使用电子轰击电离（EI）源检测,SIM模式进行质谱监测,内标法对9种大麻素类化合物进行定量。结果表明,9种大麻素类化合物在27 min内完成分离分析,并在0.01～4.0 mg/L范围内具有良好的线性关系,相关系数（r2）均不小于0.999 5,方法的检出限（LOD,S/N＝3）和定量下限（LOQ,S/N＝10）分别为0.003～0.06 mg/L和0.01～0.2 mg/L。在阴性样品中进行1、2和10倍定量下限的加标回收实验,9种大麻素类化合物的回收率为74.8%～114%,相对标准偏差（RSD,n＝6）为1.6 %～9.1 %。采用该方法对10种市售的燃香样品进行测定,均未检出大麻素类化合物。建立的方法操作简便,可快速对燃香烟气中大麻素类化合物进行定性和定量分析,且能满足发烟量大燃香的检测需求。该方法的建立为我国燃香中大麻素类化合物的监测控制提供了参考。     

Highly Efficient Oxygen Reduction Reaction Fe-N-C Cathode in Long-durable Direct Glycol Fuel Cells

The oxygen reduction reaction in direct glycol fuel cells heavily relies on noble metal-based electrocatalysts. In this work, novel Pt group metal-free catalysts based on porous Fe-N-C materials are successfully synthesized as catalysts with high activity and durability for the cathode oxygen reduction reaction (ORR). Through the encapsulation of NH₄SCN salt, the surface elements and pore structure of the catalyst are effectively changed, and the active sites of Fe effectively are increased. The half-wave potential of the best Fe-N-C catalyst was –0.02 V vs. Hg/HgO in an alkaline environment. The porous Fe-N-C catalyst possesses a large specific surface area(1158 m²/g) and shows good activity and tolerance to glycol. The direct glycol fuel cell with the Fe-N-C cathode achieved a maximum power density of 62.2 mW/cm² with 4 mol/L KOH and 4 mol/L glycol solution at 25 °C and maintained discharge for more than 250 h at a 50 A/cm² current density.     

Recent Progress on Highly Selective and Sensitive Electrochemical Aptamer-based Sensors

Highly selective, sensitive, and stable biosensors are essential for the molecular level understanding of many physiological activities and diseases. Electrochemical aptamer-based (E-AB) sensor is an appealing platform for measurement in biological system, attributing to the combined advantages of high selectivity of the aptamer and high sensitivity of electrochemical analysis. This review summarizes the latest development of E-AB sensors, focuses on the modification strategies used in the fabrication of sensors and the sensing strategies for analytes of different sizes in biological system, and then looks forward to the challenges and prospects of the future development of electrochemical aptamer-based sensors.     

Block Copolymer Supported Gold Nanoparticles Assemblies with Exposed Gold Surface

Polymer-involved nanoparticles or nanoparticle assemblies are now facing a crossroad, where the exposure of nanoparticle and multiple nanoparticles cannot be obtained at the same time. Therefore, a new series of nanoparticle clusters is synthesized, where multiple gold nanoparticles assemble with amphiphilic block copolymers supporting inside. The exposure of gold nanoparticles of the structure is confirmed and increases the reduction rate of 4-nitrophenol by 60%. The assemblies can also be used as surface enhanced Raman scattering(SERS) probes with an enhancement factor(EF) as high as 3×10³.